รหัสสินค้า	NJ0,8-4,5-N
หมวดหมู่	Inductive Proximity Switch sensor
ราคา	0.00 บาท
สถานะสินค้า	พร้อมส่ง
ลงสินค้า	8 ม.ค. 2560
อัพเดทล่าสุด	8 ม.ค. 2560
คงเหลือ	ไม่จำกัด
จำนวน	ชิ้น

General specifications
Switching function		Normally closed (NC)
Output type		NAMUR
Rated operating distance		0.8 mm
Installation		flush
Assured operating distance		0 ... 0.65 mm
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.85
Nominal ratings
Nominal voltage		8.2 V (R_i approx. 1 kΩ)
Operating voltage		5 ... 25 V
Switching frequency		0 ... 5000 Hz
Hysteresis		typ. 5 %
Suitable for 2:1 technology		yes , Reverse polarity protection diode not required
Current consumption
	Measuring plate not detected	min. 3 mA
	Measuring plate detected	≤ 1 mA
Functional safety related parameters
MTTF_d		1050 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	NAMUR	EN 60947-5-6:2000 IEC 60947-5-6:1999
Approvals and certificates
FM approval
	Control drawing	116-0165
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 100 °C (-13 ... 212 °F)
Mechanical specifications
Connection type		cable PVC , 2 m
Core cross-section		0.14 mm²
Housing material		Stainless steel 1.4305 / AISI 303
Sensing face		PBT
Housing diameter		4.5 mm
Degree of protection		IP67
Cable
	Bending radius	> 10 x cable diameter
General information
Use in the hazardous area		see instruction manuals
	Category	2G

Pepperl+Fuchs Inductive Sensor.NJ0,8-4,5-N

รายละเอียดสินค้า